Siemens 7482255 Rev 01 Page iii
October 2002
G50 and G60 S - Service Manual
Preface
This manual provides the customer service engineer (CSE) with detailed ser-
vice information for the G50 and G60 S ultrasound systems.
Document Conventions
The following conventions are employed in this document:
Italic formatted text indicates emphasis or the titles of books and manuals:
Call the UPTIME Service Center, The ANSI Standard, The User Manual.
The names of keys located on the system keyboard are presented upper-
case, bold font: CTRL, ALT, DELETE.
The names of controls, switches, and buttons located on the control panel
are presented in uppercase, bold font: SET.
Double quotes enclose chapter names and headings referenced in this
document: "Document Conventions" (page iii).
Device names are presented in uppercase: LPT1.
The names of spare parts are presented in lower case: power module,
DIMAQ-IP module, E module, and control panel.
Hazard Alerts
Alerts that notify the user and service personnel of potential hazards to the
equipment are presented in the following format:
Alerts that notify the user and service personnel of potential hazards to the
user, the patient, or to service personnel are presented in the following format:
Notes
Additional information, not related to a specific sequence of steps in the proce-
dure, is presented in the note format:
!
Warning: This manual is intended for use by trained service personnel. There are high voltages
present inside of the G50 and G60 S. Bodily harm and damage to the system may result from
untrained individuals opening the system.
!
Caution: Electrostatic discharge (ESD) can destroy the electronics contained
inside of this equipment. Don an ESD strap and observe ESD precautions when
servicing this equipment.
!
Warning: The G50 contains hazardous voltages that can range from 90 Vac to 264 Vac. These
voltages can cause serious injury or death. Only authorized service personnel are permitted to
remove protective covers and access the energized components of this system.
Note: The UPTIME Service Center maintains a list of the current options for this
equipment.
To Next Page
Loading...
