Page 38 of 42 7482255 Rev 01 Siemens
October 2002
Service Screens and Menus
4. Insert an MO diskette in the MO drive and select the Go button located at
the bottom of the screen to begin the backup.
5. When the message box shown in Figure 8-26 is displayed, select the Ok
button to format the diskette; the backup will continue.
6. The message box shown in Figure 8-27 will be displayed; accept the
backup name provided or enter a different name and select OK to continue
the backup operation.
Peripheral Information Peripheral only
Diagnostics Diagnostics only
Service History Service History only
Key History Log Key History Log only
Table 8-6 Service Data Backup Hierarchy (Sheet 2 of 2)
Top Level Sub
Category
Individual Packages Comment
!
Caution: Existing data on the MO diskette will be erased automatically during
the formatting of the diskette, before the backup data is written to the MO dis-
kette.
Figure 8-26 Disk Format Message box
X
Ok Cancel
Service
Formatting will erase all [data] from the disk.
Do you want to format disk?
Figure 8-27 Name the Backup Message Box
Note: The system software assigns a name for the backup file, using the follow-
ing date format: YYYYMMDDHHMMSS.
X
Ok Cancel
Service
Backup
To Next Page
Loading...
