Page 20 of 42 7482255 Rev 01 Siemens
October 2002
Service Screens and Menus
The Main Menu screen (Figure 8-10) displays the data items listed in Table 8-1.
Table 8-2 lists the screens and menu items that can be accessed from the Main
Menu screen (Figure 8-10).
Table 8-1 Main Menu Screen Data
Data Description
Site Name The name entered in the Hospital field of the Site Infor-
mation screen shown in Figure 8-11. See Table 8-4.
System Serial Number The system serial number entered in the Serial No.
field of the System Information screen shown in
Figure 8-13.
Product SW Version The software version entered in the field of the Soft-
ware Information screen (HW/SW) shown in Figure 8-
16. This version number applies to the system as well
as the software.
Table 8-2 Main Menu Items
Menu Item Comments
Site See “Site Information Screen” on page 8-21.
System See “System Information Screen” on page 8-24.
HW/SW See “System Configuration Screen for Hardware” on page 8-25.
See “System Configuration Screen for Software” on page 8-25.
See “System Configuration Screen for Peripherals” on page 8-26.
Transducer See “Transducer Screen” on page 8-27.
Diagnostics See “Diagnostics Screen” on page 8-29.
Log See “Log Screen” on page 8-30.
Service History See “Service History Screen” on page 8-33.
Backup / Restore See “Backup/Restore” on page 8-36.
Imaging Test Pattern See “Imaging Test Pattern” on page 8-39.
DIMAQ-IP Maintenance See “Installing or Updating the DIMAQ-IP Software” on page 8-7.
To Next Page
Loading...
