Siemens 7482255 Rev 01 Page 35 of 52
October 2002
Chapter 4 - Removing and Replacing Spare Parts
7.4 Confirming the Operation of the Keyboard
1. Connect the system power cable to a properly grounded outlet.
2. Connect a transducer to the G50 or the G60 S.
3. Turn the power switch On.
4. Turn the Standby switch On.
5. Confirm that a B-mode image is displayed on the monitor.
6. Confirm that each LCD display changes every time you press a soft key
located next to the LCD cell.
7. Press the F4 key and confirm that Preset Main Menu is displayed on the
monitor.
To Next Page
Loading...
