Siemens 7482255 Rev 01 Page 37 of 42
October 2002
Chapter 8 - Software
6.11.1 Backing Up Service Data
Use the following procedure to backup the service data.
1. Open the Main Menu service screen and select the Backup / Restore but-
ton (Figure 8-10).
2. Select the Backup radio button located at the top of the screen shown in
Figure 8-25.
3. In the scrolling list, check the box adjacent to the service data items to be
backed up: Table 8-6 lists the options available for performing a complete
or individual back up.
Figure 8-25 Backup/Restore Screen
Service
Home
Site
System
HW / SW
Diagnostics
Log
Service History
Short-cut Backup / Restore
Go
Command
Backup
Restore
Cancel
Packages
Estimated Execution Time: mm : ss
Progress Status Bar
Done!
0% 20% 40% 60% 80% 100%
All Packages
Service
Information - Site
Information - System
Information - Hardware
Information - Software
Information - Peripheral
Table 8-6 Service Data Backup Hierarchy (Sheet 1 of 2)
Top Level Sub
Category
Individual Packages Comment
All Packages All service data packages
Service All service data
Site Information Site only
System Information System only
Hardware Information Hardware only
Software Information Service data only
To Next Page
Loading...
