Siemens 7482255 Rev 01 Page 25 of 42
October 2002
Chapter 8 - Software
Select the Reset button to display a dialog box that allows the zeroing of
the elapsed time displayed in the System Use Time field.
6.4 System Configuration Screen for Hardware
Select the HW/SW button located on the Main Menu screen (Figure 8-10) to
display the System Configuration screen for hardware, software, and
peripherals shown in Figure 8-15.
Select the radio button labeled Hardware that is located on the right side of the
System Configuration screen to display the System Configuration for Hardware
screen.
The System Configuration Hardware screen displays the data values recorded
in an EEPROM located on each assembly: Assy Name and AS No.
6.5 System Configuration Screen for Software
Select the HW/SW button located on the Main Menu screen (Figure 8-10) to
display the System Configuration screen for hardware, software, and
peripherals shown in Figure 8-15.
Select the radio button labeled Software that is located on the right side of the
System Configuration screen to display the System Configuration Software
screen.
Figure 8-15 System Configuration Screen for Hardware
Service
Home
Site
System
HW / SW
Diagnostics
Log
Service History
Backup / Restore
System Configuration - Hardware
Assy No. Assy Name AS No
Hardware
Software
Peripheral
A30 ECGX 2
A36 PSEL 1
A36-2 A3RD 0
A40 STRX 3
A42 TXBF 1
A44 STRX 0
A46 RXBFA 1
A46 RXBFB 1
A48 BWPP 0
A50 SUBC 1
A51 CMEM(B)63 1
A51 CMEM(V)63 1
A56 CFPR 3
A56-1 DPPR 2
A66 DTPS 1
A70 DVSC 1
A72 BPVM 2
To Next Page
Loading...
