Siemens 7482255 Rev 01 Page 23 of 42
October 2002
Chapter 8 - Software
6.2.2 Control Buttons
Three control buttons appear at the bottom of the Site Information screen:
Input, Cancel, and Save; these control the editing of the data fields located on
the screen.
Input: Selecting the Input button allows the user to edit the data fields.
Cancel: Selecting the Cancel button displays the message box shown in
See “Cancel Message Box” on page 8-23. Select the OK button to re-dis-
play the information saved in the system memory. Selecting the Cancel
button, located in the cancel message box, returns the screen to the state
that existed before the Cancel button was pressed.
Save: Selecting the Save button displays the message, “Do you want to
save changes?” After display of the message, selecting the OK button
saves the data that is currently displayed in the data fields. Selecting the
Cancel button, after display of this message, returns the screen to the state
that existed before the Cancel button was pressed.
Location Location Enter the building or room number in which the system
is located.
Customer or
Administrator
Name Enter the name of the individual who is responsible for
the system.
ID Enter the identity number of the responsible individual.
Memo Memo Enter additional information that must be associated
with the system.
Table 8-4 Data Fields (Sheet 2 of 2)
Field Group Field Title Comment
Figure 8-12 Cancel Message Box
X
Ok Cancel
Cancel
Do you want to revert to saved data?
To Next Page
Loading...
