CAUTION
It is essential that the electrical system to which the machine is connected complies with
current regulations.
All electrical testing operations and equipment installation should be made by qualified
and trained personnel.
The designated personnel is responsible for ensuring the safety and efficiency of earth
connection.
CONNECTION TYPE
The electrical connection of the device must be carried out with a permanent
connection.
The device is supplied with a cable with insulated wire terminals; it is not supplied with
a plug.
CIRCUIT-BREAKER
A CIRCUIT-BREAKER must be installed for each appliance.
Circuit-breaker characteristics:
a. Omnipolar: must break all live conductors;
b. Easily accessible to the user;
c. Easily operated (no additional tools required);
d. Located in close proximity to the appliance;
e. Clearly marked as the appliance circuit-breaker.
The same specifications apply to the main switch on the machine: it must be easily
accessible. Do not place objects in a way that limits accessibility.
OVERCURRENT PROTECTIVE DEVICE
A PROTECTIVE DEVICE specifically for the appliance (e.g. magneto thermal breaker or
fuse on every phase, with appropriate dimensions based on the electrical characteristics
indicated) should be installed in the room’s electrical panel.
Refer to the Technical Data sheet for the device's electrical connection specifications.
To Next Page
Loading...
