Smeg WD7010 - Set up Date and Time - ID.1.4.2.1

USER MANUAL
WD6010 – WD7010 – WD7015
Page 70 - 168
11.1 SET UP DATE AND TIME – ID.1.4.2.1
Password level required: Superuser or superior level
On the screen: sequence of touch-screen operations to regulate “Date and time” fields.
Please note: it is very important to set up the date and time correctly for operations
traceability.
- From the Master CPU 5.6.0 (and later) firmware version, the password input screen requires
selection of the current user. The device's manager must select "superuser" to enter the relevant
password and then confirm the input.
“UP/DOWN” buttons
used to regulate the
activated field (“Year”
in the picture)
“Confirmation” button
to save and confirm the
inserted values