7 OPERATING PROCEDURES
After the device has been correctly installed, it must be set for operating use. Execute the following steps:
- Set current date and time.
- Set desired language.
- Prepare the detergent, neutralizer, and any other chemical agents to be used.
- Upon installation an authorized technician is required to activate the peristaltic pumps manually so that
the detergent charging hoses are correctly filled.
- Run, empty load, a complete program including thermal disinfection.
Once these steps have been successfully completed, the machine is ready for use.
7.1 Access to detergent compartment
Front view of the device – loading side: for both hinged and sliding door machines, the steel bottom door giving
access to the detergent compartment is underneath the main door of the tank.
The detergent compartment door has a handle allowing it to be opened by hand.
The detergent compartment is able to take up to:
- 6010 and 7010: N.3 x 5 litre jerrycans plus a N.1 x 2 litre bottle
- 7015: N.3 x 5 litre jerrycans plus N.2 x 2 litre bottles.
(refer to the chemical products and jerrycans supplied by the device's manufacturer).
Frontal view of the device. Under the main door of
the tank there is a steel door that opens to the
detergent compartment.
The detergent compartment door is equipped with a handle
for manual opening.
To Next Page
Loading...
