11.9 ABOUT – ID. 1.4.5.0 – 1.4.5.1
Screen accessible at the level “user” or superior.
It shows the values and dates of issue of the FW installed on the electronic boards of the device.
11.10 USER PASSWORD – ID. 1503
From firmware version Master CPU 5.6.0 the device is equipped with a function allowing identification of:
1. the user who has selected and started the wash cycle,
2. the user who has opened the door of the device at the end of the cycle.
This function is deactivated by default and can be activated by the Superuser.
If this "User check" function is activate, a numerical password is associated to every enabled user.
Basic level users - normal users of the device - can only change their own passwords.
Users are identified by a number, e.g.: user_01, user_02, etc.
The password change procedure is described below.
To Next Page
Loading...
