1 INITIAL RECCOMENDATIONS
READ THE PRESENT INSTRUCTION MANUAL CAREFULLY:
This manual constitutes an integral part of the machine.
It must be kept intact and at hand for the entire life cycle of the machine.
It is necessary to read the following manual carefully prior to using the device.
Failure to read or thoroughly comprehend the instructions in this manual may cause the device to malfunction and
present hazards to the user.
Machine installation, maintenance, and repair operations must be performed by authorized
technical staff.
Repair operations performed by unauthorized staff, besides leading invalidating the product
warranty, can be source of danger for the user.
In case of replacement, an original spare part must be used.
If the device was not used in accordance to the instructions presented in this manual, the
product may no longer be covered by warranty and the safety of this device could be
compromised (ref. par 5.4.4 IEC 61010-1:2010).
The producer declines all liability for any use that differs from what indicated in the present
manual.
Excluding possible manufacturing defects, consumable materials (Detergents, Air Filters,
Thermal Printer Paper…) are not covered under warranty.
The product warranty does not cover faulty parts due to negligence, inappropriate use, or
failure to comply with the instructions of the device operations; incorrect installation or
maintenance; repair and maintenance operations performed by unauthorized staff or with
non-original spare parts; transportation damages; and any circumstance that cannot be
ascribed to the device manufacturing defects.
Moreover, the warranty does not cover operations related to installation and connection of
alimentation and drain systems as well as maintenance operations provided in the instruction
booklet.
The installation of any accessory on the machine must be performed by authorized technical
staff.
To request further information about accessories: contact your trusted seller and/or the
authorized technical assistance, using the contact details provided in this manual (ref. 5.4.4.c
IEC61010-2-040:2015)
The content of this manual is for information purposes only. The content and the equipment described here may be
subject to change without notification. The colours used in photographs of the product (finishing panels), in diagrams
and in screenshots are all purely guideline.
To Next Page
Loading...
