Smeg WD7010 - Page 6

USER MANUAL
WD6010 – WD7010 – WD7015
Page 6 - 168
193906237 – IT
13
11/03/2022
Describing new functions:
1. Management of new optional Barcode Scanner (ref. “WD-CODESCAN”).
2. Management of “Signal Box”, optional accessory for interfacing device status signals for
external communications (ref. “WD-SIGNBOX15”).
3. Management of interfacing between device and Smeg Energy Management app (ref. “WD-
EMS”).
6. Custom programs: up to n.3 target temperatures, each phase
[The firmware includes these functions with effect from the Master CPU version 14.8.0,
issued in February 2022.] The software paired with the firmware is WD-Connect Ver 3.1.7,
issued in February 2022].
-
12
02/08/2021
Doc. describing new functions:
- Management of archive download to USB drive.
- For WD7015 and GW7015 series products only: Possibility of management of
automatic loading and unloading systems, CB7015.
For WD7015 series: This firmware update is also a product update, identified by code “SI 01”
(Service Index 01) on the dataplate next to the model's name and code.
[The firmware includes these functions with effect from the Master CPU version 11.18.0,
issued in July 2020.]
-
10
07/04/2020
NEW PROGRAM PARAMETER: “PASSING / NOT PASSING” FLAG [ The firmware manages this
functionality starting from the Master CPU 11.8.0 version of January 2020. ].
-
09
19/09/2019
Cable type update.
-
08
17/05/2019
New WD6010 models provided with steam heating system.
New functions ( Trolley check, Spray arms check, Automatic operation).
New alarms and warning messages.
05
07/02/2018
Addition of model WD7015.
04
23/10/2017
This manual refers to FW CPU main master version 7.16.0: Some features may be absent in
previous versions of the firmware.
01
14/02/2017
This manual refers to FW CPU main master version 6.5.0: Some features may be absent in
previous versions of the firmware.
Cod.
Rev.
Date
Note