Smeg WD7010 - Counters - ID. 1.4.6.1

USER MANUAL
WD6010 – WD7010 – WD7015
Page 72 - 168
11.3 COUNTERS – ID. 1.4.6.1
Access from menu “Setup” -> Counters. Access can be visualized by the user.
(Access with the possibility to reset the partial counters for the technician).
The screen shows n.4 different counters. The former two are “absolute” counters, the latter two are partial counters
and can be reset by the authorized technician.
Number of machine
cycles
Absolute counter of the performed cycles.
Dryer hours
Absolute counter of the operation hours of the dryer system (drying)
Partial number of
cycles
counter of the performed cycles since the last maintenance (the technician resets it in
the moment of maintenance)
Partial dryer hours
counter of the operation hours of dryer since the last technical maintenance
(replacement of the drying filter).