The symbol of a “crossed out wheelie bin” (attachment IV directive 2002/96/EC): placed on the
specific label and package of the product: at the end of its service life, the product must be sent to
the disposal facilities for recovery and recycling, in compliance with the regulations in force in the
country where it is installed. Contact the specialized disposal installations.
The management of WEEE (Waste of electrical and electronic equipment) is in the hands of
manufacturers, whose duty is to plan and manage the collection system; today it is possible to
deliver the waste directly to the dealer for free, when purchasing a device of the same type.
If purchasing a new equivalent device to replace the previous one, the disposal fees are at the
expense of the manufacturer of the new device.
At the end of its service life the machine might be contaminated, in particular the tank and water
circuit (e.g. end of service life caused by a malfunction which compromised the efficiency of the last
thermal disinfection cycle): use proper caution in the disposal operations. By making sure that this
product is disposed of properly, the user contributes in preventing any possible negative effects on
the environment and health.
The disposed device must be made unusable. Remove the power cable after unplugging it / after
disconnecting the cable from the power outlet.
Before the old device can be disposed of, all old, accessible and removable batteries and accumulators
must be separated. The same goes for lamps that can be removed from the old device without being
destroyed. The end user is also responsible for the deletion of personal data on the old device.
CE marking, IMQ notified body (CE0051 on model series “WD” only, medical devices).
The symbol is on the specific label of the machine and in this manual to identify a medical device with
CE certification released by IMQ (“0051” is the identification number of the notified body IMQ).
To Next Page
Loading...
