Smeg WD7010 - Page 53

USER MANUAL
WD6010 – WD7010 – WD7015
Page 53 - 168
OPEN: Button for opening the sliding door (DOWNWARD travel).
CLOSE: Button for closing the sliding door (UPWARD travel).
STOP: button for halting automatic movement of the sliding doors.
Door status
Screen 1300 provides information about the status of the doors. There are three possible stages for each
door:
1. Closed – door at closed limit stop position. The door can only be opened.
2. Open – door at open limit stop position. The door can only be closed.
3. Intermediate – door in an intermediate position between the two limit stops. The door can only be
closed.
The door can only be in an intermediate position if opening or closure has not been correctly completed.
The possible causes are:
1. Power failure with door in motion,
2. Travel halted by tripping of safety devices, e.g. due to opening of the detergent compartment door.
Door opening button