Sony MLS-X1 User Manual

284
settings and display of the memory recall buttons in the
Flexi Pad control block and in the menu are linked.
This section describes the M/E-1 menu as an example.
Set the state to save in a snapshot and use the following
pr
ocedure to save in a snapshot register.
1 Open the Home > M/E-1 > Common > Snapshot
menu (11110.21).
2 Press the [Store] button in the [Mode] group.
3 Press the [Bank] button and enter a bank number in
the numeric keypad window.
The memory recall section switches to display the
sel
ected bank.
4 Press the button for the target register to save.
The register button is lit orange and the snapshot is
sav
ed.
If you press a register button in which a snapshot is
al
ready saved, the register data will be overwritten.
5 Set attributes.
Set attributes for a register as required.
To add the auto transition attribute
Set the [Auto Transition] button to the on state.
To add the effect dissolve attribute
Set the [Activate] button in the [Effect Dissolve]
g
roup to the on state.
Press the [Duration] button in the [Effect Dissolve]
g
roup and enter a duration (number of frames) for the
effect dissolve in the numeric keypad window.
To add the cross-point hold attribute
In the [Xpt Hold] group, set the button for the target
bu
s to the on state.
A:
Background A bus
B: B
ackground B bus
Utility 1: U
tility 1 bus
Utility 2: U
tility 2 bus
DME External: DME e
xternal video bus
Key 1 to Key 8:Key 1
bus to key 8 bus
To delete a register
A locked register cannot be deleted.
1 Press the [Delete] button in the [Mode] group.
2 Select a bank and press the button for the target
register to delete.
To rename a register
A locked register cannot be renamed.
1 Press the [Rename] button in the [Mode] group.
2 Select a bank and press the button for the target
register to rename.
The [Rename] window appears.
3 Press the input field and enter a name (up to 8
characters) using the keyboard.
4 Press [OK].
Snapshot for a region other than a
switcher bank
Set the state to save in a snapshot and use the following
procedure to save in a snapshot register.
1 Display the [Snapshot] taskbar.
Snapshot recall/store mode is activated.
2 Press the [Recall/Store] button.
The [Recall/Store Register] window appears.
3 Set the button for the target region to the on state.
You can select multiple regions.
For details about the display in the region display
sect
ion, see “Region display section” (page 283).
Select a tab to change the region to display.
[ME] tab: S
witcher bank regions
[User] tab: U
ser regions
[DME] tab: DME
regions
[External Device] tab: E
xternal device regions
The first selected region becomes the reference
r
egion.
To select all regions configured beforehand
Set the [All Regions] button to the on state.
For details about setting the regions selected
sim
ultaneously, see “Setting Regions Selected
Simultaneously” (page 402).
4 Press the [Store] button.
To add the auto transition attribute
Set [Auto Trns] in the numeric keypad area to the on
stat
e.
Note
Note
Note

Sony MLS-X1 Specifications

General

Brand	Sony
Model	MLS-X1
Category	Switch
Language	English