Sony MLS-X1 - Deleting a File; Renaming a File

342
For details, see “Editing Package Properties”
(page 332).
To select the default package
Press the [Default Package] button.
8 In the [Target Package] group list, select a copy
destination file.
When multiple files are selected, select the first copy
de
stination file.
You can also press the [Select Destination] button
an
d enter a file number in the numeric keypad
window.
The copy destination of the first file selected in the
[S
ource Package] group is the first file selected in the
[Target Package] group, and the subsequent files in
the [Target Package] group in the same relative
positions as the selected files in the [Source Package]
group become copy destinations. The first file in the
[Target Package] group is shown in light blue, and the
subsequent copy destination files are shown in blue
gray.
• Selection of a file is not required in the macro
a
ttachment category.
Pressing the [Search] button searches for the file
n
ame and displays only the corresponding files.
• Searching is not available for key snapshots, wipe
sn
apshots, DME wipe snapshots, and macro
attachment categories.
9 Press the [Copy] button.
10 Check the message, then press [OK].
The files are copied.
To display the file view/edit menu
A list of the files included in the selected package is
di
splayed in the [Source Package] group/[Target
Package] group.
Press the [Browse Files] button to recall the file view/edit
menu
for each category.
For the effect timeline category, the Home > File >
Regist
er > Effect Timeline > Browse Files menu
(10104.14) is recalled.
Deleting a File
Files in a locked package cannot be deleted.
1 Open the Home > File > Register > Effect Timeline >
Browse Files menu (10104.14).
2 Select a region.
The regions that can be selected vary depending on
t
he category.
For details, see “To select a region” (page 340).
Selection of a region is not required in the shotbox,
macro,
and macro attachment categories.
3 Press the [Select] button in the [Package] group.
The [Select Package] window appears.
4 Select a package and press [OK].
To select the default package
Press the [Default Package] button.
5 In the [Package] group list, select the target file to
delete.
To select and delete multiple files, place a check mark
be
side the target files to delete.
To select and delete all files, place a check mark in the
Sel
ect All checkbox.
You can also press the [Select File(s)] button and
ent
er a file number in the numeric keypad window.
• Selection of a file is not required in the macro
at
tachment category as there is only one file.
Pressing the [Search] button searches for the file
name
and displays only the corresponding files.
• Searching is not available for key snapshots, wipe
snap
shots, DME wipe snapshots, and macro
attachment categories.
6 Press the [Delete] button.
7 Check the message, then press [OK].
The file is deleted.
Renaming a File
Files in a locked package cannot be renamed.
1 Open the Home > File > Register > Effect Timeline >
Browse Files menu (10104.14).
2 Select a region.
The regions that can be selected vary depending on
t
he category.
Notes
Note
Note
Notes
Note