306
For details about GPI inputs, see “Setting a GPI Input”
(page 425).
Macro Operations (Flexi
Pad Control Block)
You can create and edit a macro on the Flexi Pad control
block in macro operation mode.
• Menu operation events cannot be registered using the
Fl
exi Pad control block.
• A macro cannot be created/edited using the Flexi Pad
cont
rol block when the numeric keypad control block or
menu is in macro edit mode.
• When executing a macro, if you switch to macro edit
mode,
the macro currently being executed stops.
• A macro cannot be executed while creating/editing a
macro.
Memory recall section in macro operation
mode
The illustration shows the ICP-X7000 Flexi Pad control
block. The operation for the ICP-X1000 series Flexi Pad
control block is the same.
Pressing the [MCRO] button in the Flexi Pad control
bl
ock, turning it on amber, switches the memory recall
section to macro operation mode.
Notes
UNDO button
DEL button
Memory recall section
Bank selection buttonsMCRO button
To Next Page
Loading...
