Sony MLS-X1 - Independent Key Transition Control Block

29
c Fader lever/transition indicator
Independent Key Transition Control Block
The independent key transition control block is used to
execute independent key transitions.
For details, see “Chapter 5 Transitions” (page 94).
a I
ndependent key transition execution buttons
(assignable buttons)
You can assign execution buttons for independent key
t
ransitions in the Home > Setup > Panel > Module >
Button Assign menu (19104.21).
For details about assigning buttons, see “Assigning
Control Panel Buttons” (page 402).
• The [KEYx ON] button (x = 1 to 8) and the [AUTO
TR
ANS] button for the same key are assigned as a set.
• You can also assign keys of any switcher banks (M/E-1
to
M/E-5, P/P).
b Di
splay
Displays the following information for each key assigned
to
an independent key transition execution button.
• Key content name (key source name when a key source
is
selected on a cross-point control block key bus)
• Currently used DME channel or resizer
• Transition rate
• Transition type
Transition indicator
Fader lever
Lock button
Name Description
Fader lever Move this up or down to execute a
tra
nsition.
You can press the [KF] button, turning it
on
, to use the fader lever as a keyframe
fader.
You can press the lock button to unlock
th
e fader lever and split it into two for use
as split faders.
Transition
ind
icator
Displays the transition progress using
LEDs.
ab
Function name Button
name
Description
Current Bank:
Key 1 Transition
to Ke
y 8
Transition
KEY1 ON
to KEY8
ON
Inserts or removes a key
ins
tantaneously.
If a key is currently
ins
erted, the button is lit
amber.
AUTO
TRANS
Inserts or removes a key
aut
omatically with the set
transition rate and
transition type.
During the transition, the
but
ton is lit amber.
Other Banks:
M/E-x Key 1
Tran
sition to M/E-
x Key 8 Transition
(M/E-x = M/E-1 to
M/E
-5)
P/P Key 1
Tran
sition to P/P
Key 8 Transition
KEY1 ON
to KEY8
ON
Inserts or removes a key
ins
tantaneously.
If a key is currently
ins
erted, the button is lit
amber.
AUTO
TRANS
Inserts or removes a key
aut
omatically with the set
transition rate and
transition type.
During the transition, the
but
ton is lit amber.
Notes