293
To select and delete all registers, place a check mark
in the Select All checkbox.
You can also press the [Select Register(s)] button and
en
ter a register number in the numeric keypad
window.
4
Press the [Delete] button.
5
Check the message, then press [OK].
Renaming a register
A locked register cannot be renamed.
1
Open the Home > Register > Wipe Snapshot > Edit
Register > Browse menu (18304.11).
2
Select the target switcher bank to set.
For details, see “To select a switcher bank”
(page 291).
3
Select the target register to rename.
To select and rename multipl
e registers, place a check
mark beside the target registers to rename.
To select and rename all registers, place a check mark
i
n the Select All checkbox.
You can also press the [Select Register(s)] button and
en
ter a register number in the numeric keypad
window.
4
Press the [Rename] button.
The [Rename] window appears.
5
Press the input field and enter a name (up to 8
characters) using the keyboard.
6
Press [OK].
DME Wipe Snapshot
Register Operations
Displaying a DME Wipe Snapshot
Register
In the Home > Register > DME Wipe Snapshot > Edit
Register > Browse menu (18305.11), perform the same
operation as for a wipe snapshot register.
For details about the method of operation, see
“Displaying a Wipe Snapshot Register” (page 291).
Editing a DME Wipe Snapshot
Register
You can copy, move, and swap a DME wipe snapshot
register in the following menu in the same way as for a
wipe snapshot register.
Home > Register > DME Wipe Snapshot > Edit Register
> C
opy/Move/Swap menu (18305.12)
For details about the method of operation, see “Editing a
Wipe Snapshot Register” (page 291).
You can lock, delete, and rename a DME wipe snapshot
re
gister in the following menu in the same way as for a
wipe snapshot register.
Home > Register > DME Wipe Snapshot > Edit Register
> B
rowse menu (18305.11)
For details about the method of operation, see “Editing a
Wipe Snapshot Register” (page 291).
Note
To Next Page
Loading...
Need help?
General
