Sony MVS-8000 - About the Macro Attachment List Display; M;E and PGM;PST Banks

Appendix (Volume 2)
1057
About the Macro Attachment List Display
About the Macro Attachment List Display
The Button column in the macro attachment list displayed in the status area of
the Macro >Attachment menu screen shows character strings which identify
macro attachment assigned buttons. Each of these character strings is in fact a
combination of characters shown in the Button(1), Button(2), and Button(3)
columns in the following tables.
For example, if Block and Button(1) to Button(3) are combined as:
Block: P/P XPT
Button(1): UTIL1 Bus
Button(2): V
Button(3): XPT2
The Button column in the macro attachment list in the Macro >Attachment
menu screen shows “UTIL1 Bus V XPT2,” which means “utility 1 bus, video
signal, cross-point number 2.”
M/E and PGM/PST Banks
The following table shows only the macro attachment assignable buttons in the
PGM/PST bank.
For the M/E-1 (M/E-2 or M/E-3) bank, “P/P” in the Block Select and Block
columns changes to “M/E-1” (“M/E-2” or “M/E-3”) and “DSK” in the
Button(1) and Button(2) columns changes to “KEY.” The contents of the
Button(3) column do not change.