Sony MVS-8000 - Mono Settings; Posterization and Solarization Settings

Chapter 11 DME Operations
647
DME Special Effect Operations
Mono Settings
Applying the Mono effect
1 In the DME menu, select VF2 ‘Video Modify’ and HF3 ‘Color Modify.’
The Color Modify menu appears.
2 Press [Mono], turning it on.
The Mono effect is enabled. The color image changes to monochrome.
Masking the Mono effect with a selected pattern
Press [Mask] to display the Mask menu, and set the pattern type and modifiers.
For details, see “Mask Settings” (page 657).
Notes
The Mask function is not supported on the MVE-8000.
Posterization and Solarization Settings
You can specify the degree of luminance coarsening.
You can specify the degree of chroma coarsening.
Applying the Posterization or Solarization effect
1 In the DME menu, select VF2 ‘Video Modify’ and HF3 ‘Color Modify.’
The Color Modify menu appears.
2 Press [Poster/Solar], turning it on.
The Posterization and Solarization effects are enabled. You can adjust the
coarseness of the gradations with the knobs.
3 Set the parameters.
Knob Parameter Adjustment Setting values
1 Poster Coarseness of luminance
gradations (Posterization
parameter)
0.00 to 100.00