Chapter 16 Macros
964
Macro Operations in the Multifunction Flexi Pad Control Block
Macro Operations in the Multifunction Flexi
Pad Control Block
This section describes macro operations carried out in the Multifunction Flexi
Pad control block.
Use the following buttons.
Recalling a Macro Register and Executing a Macro
1
Press the [MCRO] mode selection button, turning it on.
This switches the Multifunction Flexi Pad control block to macro
operation mode.
2
Enter the register number with the numeric keypad buttons, and press the
[ENTR] button to recall the register.
[MCRO] button
Numeric keypad buttons
[DRCT MODE] button
To Next Page
Loading...
