Chapter 15 Utility/Shotbox
926
Shotbox Execution
• The numeric display shows the bank number followed by the selected
register number.
• If the selected shotbox register has auto run set, on recall the effect is
immediately executed.
When auto run is not set for the recalled register
Simply recalling the register does not run the effect. To do this, press the
[RUN] button.
Shotbox Execution in the Utility/Shotbox Control Block
Utility/shotbox control block
In the utility/shotbox control block, as the default setting the memory recall
buttons have registers 1 to 96 allocated to banks 1 to 4.
Bank Register allocation to memory recall buttons
11 to 24
2 25 to 48
3 49 to 72
4 73 to 96
Bank selection buttons
Memory recall buttons
To Next Page
Loading...
