Chapter 1 MVS-8000 Functions
44
Basic Video Processing
For details, see “Multi Program 2” (page 489).
Simple P/P Software
By installing the BZS-8250 Simple P/P Software in the MVS-8000A/
8000ASF/8000G/8000GSF Switcher Processor, you can use a separate
program/preset function without using the M/E hardware.
For details, see “Simple P/P Software” (page 504).
Dual Link Support
By installing the BZS-8560 switcher upgrade software in the MVS-8000G, or
the BZDM-8560 DME upgrade software in the MVE-8000A, you can switch
the signal format to 1080P/59.94 or 1080P/50. In this case, signal input/output
uses a dual link.
For details, see “Dual Link Support” (page 508).
Background A
Key 1
Program output for “Main”
Background B
Background A
(signal from utility 2 bus)
Key 3
Background B
(signal from utility 3 bus)
Program output for “Sub”
To Next Page
Loading...
