Sony MVS-8000 - Mask Settings

Chapter 11 DME Operations
657
DME Special Effect Operations
Notes
The Mask function is not supported on the MVE-8000.
Mask Settings
Notes
The Mask function is not supported on the MVE-8000.
Applying masks
1 In the DME menu, select VF2 ‘Video Modify’ and HF7 ‘Mask.’
The Mask menu appears.
2 In the <Mask> group, press the button for the group of the effect to which
you want to apply the mask, turning it on.
Effect Gp 1: Posterization, Solarization, Nega, Sepia, Mono, Contrast,
Mosaic, Sketch, Metal
Effect Gp 2: Defocus, Blur, Glow
Notes
On the MVE-8000A, Effect Gp 1 and Effect Gp 2 cannot be turned on at
the same time.
3 Press [Position/Size].
4 Set the mask source parameters.
The valid ranges of the parameter values depend on the combination of
signal format (SD/HD) and aspect ratio (4:3/16:9) selected in the system,
as follows.
•4:3 mode
Knob Parameter Adjustment Setting values
1 H Horizontal position –8.00 to +8.00 (SD)
–24.00 to +24.00 (HD)
2 V Vertical position –6.00 to +6.00 (SD)
–18.00 to +18.00 (HD)
3 Size Size of mask 0.00 to 100.00
4 Soft Softness of mask 0.00 to 100.00
5 Pattern Pattern number
21, 24, 304
a)