Chapter 11 DME Operations
656
DME Special Effect Operations
Applying the Glow effect
1
In the DME menu, select VF7 ‘Enhanced Video Modify’ and HF4 ‘Glow.’
The Glow menu appears.
2
Press [Glow], turning it on.
This enables the Glow effect.
Notes
• On the MVE-9000, the key border function and Glow function cannot be
turned on at the same time. The function most recently turned on is
effective.
• On the MVE-8000A, the Defocus and Glow effects or the Blur and Glow
effects cannot be turned on at the same time. The effect most recently
turned on is effective.
3
Set the parameters.
4
Press [Matte] and set the glow color.
Inverting the highlight areas
Press [Glow Invert], turning it on.
The highlight and non-highlight areas are inverted.
Masking the Glow effect with a selected pattern
Press [Mask] to display the Mask menu and set the type of pattern and
modifiers.
For details, see “Mask Settings” (page 657).
Knob Parameter Adjustment Setting values
1 Clip Reference level for highlight
detection
0.00 to 100.00
2 Gain Amount of gain for highlights –100.00 to +100.00
3 Soft Softness 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
To Next Page
Loading...
