Chapter 11 DME Operations
699
DME Special Effect Operations
Trail Settings
Notes
• Of the three effects of trail, motion decay and keyframe strobe, only one can
be on at a time. When one of them is on, turning another of them on
automatically turns off the one that has been on.
• When using the MVE-8000, the Trail effect cannot be applied to more than
two channels at the same time.
• Turning Trail on when Motion Decay (see page 703), Keyframe Strobe (see
page 705) or Wind (see page 707) is on turns it off automatically.
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
With no selection made in
the <Bar Light Mode>
group
Width
Bar Light
With a selection made in
the <Bar Light Mode>
group
Diffuse Light
Diffuse Light
Bar Light
Offset = 0
To Next Page
Loading...
