Chapter 2 Menus and Control Panel
93
Names and Functions of Parts of the Control Panel
appear only while the [2ND] button is held
down.
j SHIFT button
While this button is active, the source name
displays show the shifted signal names.
Press this button to toggle between the
shifted and unshifted states.
k RTR (router) button
Press this button, turning it on, to assign the
auxiliary bus control block to router
control.
l Level selection buttons
To each of the four buttons, plural S-Bus
levels are assigned in the Setup menu. Press
a button, turning it on, to make operations
apply to those S-Bus levels.
Menu Control Block
a Top menu selection buttons
These select the menu appearing in the
menu display.
It is also possible to change the assignment
of these buttons in setup.
For details, see “Overall Control Panel
Settings (Config Menu)” in Chapter 19
(Volume 3).
2 Menu display1 Top menu selection buttons
3 Knobs4 User preference buttons
To Next Page
Loading...
