Chapter 4 Keys
260
Key Adjustment Operations With the Multifunction Flexi Pad Control Block
Key Adjustment Operations With the
Multifunction Flexi Pad Control Block
This section describes basic key adjustment operations when using the
Multifunction Flexi Pad control block.
Selecting the switcher bank and keyer
Before carrying out key adjustment, first select the key adjust mode, then select
the switcher bank and keyer.
For example, to adjust key 1 on M/E-1, proceed as follows.
1
In the Multifunction Flexi Pad control block mode selection buttons press
[KEYADJ].
2
Press the [M/E1] region selection button.
3
In the memory recall section, press the [KEY1] button.
EDIT ENBL button
Mode selection buttons
Alphanumeric display
Adjustment knobs
Adjustment knob displays
Memory recall section
Region selection buttons
To Next Page
Loading...
