Chapter 2 Menus and Control Panel
111
Names and Functions of Parts of the Control Panel
a Cross-point control block
For details of cross-point control block
operation, see “Cross-Point Control
Block” (page 59).
For operations in AUX control mode, see
“Auxiliary Bus Control Block (for AUX
Buses)” (page 89) and “Cross-Point
Control Block (CCP-6224/6324) in the
AUX Operating Mode” (page 112).
b Transition control block (compact
type)
For details of operations, see “Transition
Control Block (Compact Type)” (page
108).
c Device control block (track ball)
For details of operations, see “Device
Control Block (Trackball)” (page 74).
d Multifunction Flexi Pad control
block
For details of operations, see
“Multifunction Flexi Pad Control Block”
(page 114).
CCP-6324 3M/E Control Panel
In this system, you can use the built-in
CCP-6324 3M/E Control Panel. This panel
has three cross-point control blocks, three
transition control blocks (compact type),
one device control block (trackball), and
one Multifunction Flexi Pad control block.
1 Cross-point control block 4Multifunction Flexi Pad
control block
2Transition
control block
(compact type)
3Device control block
(track ball)
To Next Page