Chapter 19 Control Panel Setup (Panel)
1132
Overall Control Panel Settings (Config Menu)
The following are the button functions.
Ptn Limit /KF: Use the respective buttons as a [PTN LIMIT] button,
[LIMIT SET] button, and [KF] button.
Play/Stop/Cue: Use the respective buttons as a [PLAY] button, [STOP]
button, and [CUE] button for VTR operations.
9
Press [Set].
The texts on the button displays change to the selected items.
To inhibit the button operations
Press [Clear].
To make the assignment the default
Press [Default].
Setting the Assignment of Macro Operation Buttons
Notes
This setting applies to all simple type Flexi Pad control blocks on the control
panel.
To switch the [UNDO] button on a simple type Flexi Pad control block to a
[MCRO] button for macro operation, use the following procedure.
1
In the Panel >Config >Link/Program Button menu, press [Flexi Pad
Module].
The Flexi Pad Module menu appears.
2
Select the assignment of the [UNDO] button in the simple type Flexi Pad
control block from the <UNDO Button Assign> group.
UNDO: use as an [UNDO] button.
MACRO: use as a [MCRO] button.
Knob Parameter Adjustment Setting values
1 Button
Assign
Selection of button functions 1 or 2
To Next Page
Loading...
