Sony MVS-8000 - Masks

Chapter 4 Keys
254
Key Setting Operations With the Key Control Block
Masks
Using the main mask
In the key control block, press the [MAIN MASK] button, turning it on.
The parameter settings depend on the mask source selected as [Box] or
[Pattern] in the <Mask Source> group of the Main Mask menu for the key.
• When box is selected
When box is selected and the [MORE] button is lit amber, there are more
settings. Press the [MORE] button, so that it changes from amber to green to
make the extra setting.
• When pattern is selected
a) The pattern is the same as a standard wipe. (See “Wipe Pattern List” (page 522).)
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0 to 100
2 Saturation Saturation 0 to 100
3 Hue Hue 359 to 0
4 Density Density 0 to 100
Knob Parameter Adjustment Setting values
1 Top Top position –100 (shown as –00) to +100
2 Left Left position –100 (shown as –00) to +100
3 Right Right position –100 (shown as –00) to +100
4 Bottom Bottom position –100 (shown as –00) to +100
Knob Parameter Adjustment Setting values
1 Soft Box softness 0 to 100
Knob Parameter Adjustment Setting values
1 Size Pattern size 0 to 100
2 Soft Edge softness 0 to 100
3 Pattern Pattern number
1 to 24
a)