Chapter 7 Frame Memory
424
Image Data Management
• Press the arrow keys to scroll the display.
• Press directly on the thumbnail in the status area.
• Turn the knobs.
4
Select the destination folder and file.
5
Press [Move].
6
To confirm the move press [Yes], and to cancel press [No].
Deleting Files
1
In the Frame Memory menu, select VF4 ‘File’ and HF5 ‘Delete.’
The Delete menu appears. In the status area, whether pair mode is on or
off, all of the saved files appear as thumbnails.
2
Select the folder which contains the file to be deleted.
3
Using either of the following methods, select the file to be deleted. If
necessary, press the arrow keys to scroll the display.
• Press directly on the thumbnail in the status area.
• Turn the knobs.
• To delete all files, press [Select All], turning it on.
• When a clip thumbnail is selected, the still image files making up the clip
are also selected for deletion.
4
If necessary, turn the knob to check the contents of the frame memory clip
through the thumbnail display.
Knob Parameter Adjustment Setting values
1 No File selection 1 and upwards
2 Num Selection of number of files in
sequence
1 and upwards
Knob Parameter Adjustment Setting values
1 No File selection 1 and upwards
2 Num Selection of number of files in
sequence
1 and upwards
Knob Parameter Adjustment Setting values
3 Viewer For a movie, the current frame
position. For a still image, no effect.
00:00:00 and
upwards
To Next Page
Loading...
