Chapter 3 Signal Selection and Transitions
199
Fade to Black
During the transition, the [FTB] button lights amber. When the transition
completes (the video is completely black), the button lit color changes to red.
Setting the Fade to Black Transition Rate
Setting the fade to black transition rate
1
In the PGM/PST menu, select first VF7 ‘Misc,’ then HF1 ‘Transition.’
The Transition menu appears.
2
Select [FTB].
3
Turn the knob to set the fade to black transition rate.
Displaying the transition rates in a menu and changing the
settings
You can also display the transition rate, independent key transition rate, and
fade-to-black transition rate for each of the M/E and PGM/PST banks, and
change the settings.
For more details, see “Displaying a List of Transition Rates and Changing the
Settings” (page 452).
Knob Parameter Adjustment Setting values
1 Transition Rate Transition rate 0 to 999 (frame count)
To Next Page
Loading...
