Chapter 11 DME Operations
659
DME Special Effect Operations
m
m
In the state corresponding to image 2, if you switch [Effect Gp2] to On, then
the mask should be applied to portion 2 only, but in fact the border or beveled
edge is also masked.
Freeze Settings
Freezes the input video. The following types are available:
Hard Freeze: Freezes the input video at an arbitrary timing.
Image 1: Image before applying mask
Border or
beveled edge
Image with
‘Mono(chrome)’ or
‘Defocus’ applied
Image 2: State with [Effect Gp1] only set to On
Portion 2 has ‘Mono’
masked, and ‘Defocus’
only applied.
Portion 1 has both
‘Mono’ and ‘Defocus’
applied.
Image 3: State with [Effect Gp1] and [Effect Gp2] set to On
The border or beveled
edge effect is also
masked.
To Next Page
Loading...
