Chapter 11 DME Operations
661
DME Special Effect Operations
The Time Strobe freeze is enabled. You can adjust the freeze interval and
the ratio of live video inserted between freeze images.
3
Set the parameters.
Applying the Film effect
Notes
When 720P signal format is used, the Film mode cannot be selected.
1
In the <Freeze> group, press [Film], turning it on.
The Film freeze is enabled. You can adjust the ratio of frame advance.
2
Set the parameter.
Nonlinear Effect Settings
You can add a variety of effects, including effects that change the shape of the
image as a whole.
1
In the DME menu, select VF4 ‘Non Linear/Corner Pin’ and HF1 ‘Non
Linear.’
A menu for selecting the various effects appears.
2
Display the menu for the effect that you want to apply by pressing its
button.
The effect displayed is enabled.
3
Make the settings for the selected effect.
Knob Parameter Adjustment Setting values
1 Duration Freeze interval 1 to 255 (frames)
2 Live Ratio of live video inserted
between freeze images
0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Film Ratio of frame advance 0.00 to 100.00
To Next Page
Loading...
