Chapter 2 Menus and Control Panel
82
Names and Functions of Parts of the Control Panel
REC: When pressed simultaneously with
the [PLAY] button, this button lights
red (the [PLAY] button lights amber),
and the image from the selected device
is recorded.
This button cannot be used for frame
memory clip operations.
f External device operation buttons
ENBL (enable): When this is pressed,
turning it on, the search dial [VAR],
[JOG], and [SHTL] button operations
are enabled.
VAR (variable): Sets the search dial to
variable mode.
JOG: Sets the search dial to jog mode.
SHTL (shuttle): Sets the search dial to
shuttle mode.
g TIMELINE button
Press to switch the device selected with the
device selection buttons to timeline setting
mode.
h STOP button
When pressed, this lights amber, and
operation of the device selected with the
device selection buttons stops.
i Search dial
Use this for search and other operations on
the material of an external device.
For details of the method of use, see
“Controlling Tape/Disk Transport” in
Chapter 12 (Volume 2).
Keyframe Control Block
In the keyframe control block, you can
carry out effect editing and execution.
To Next Page
Loading...
