Chapter 20 Switcher Setup (Switcher)
1213
Signal Input Settings (Input Menu)
Disable under “Frame Delay.” In this case “--” appears under “Format
Converter.”
Selecting the Format Converter Conversion (When
Using the MVS-8000G)
Selecting the format converter inputs to be set (inputs 1 to 8 or
inputs 9 to 16)
1
Display the Switcher >Input >FC Adjust menu.
Notes
When the conversion format is 1080i/59.94 or 1080i/50, and the Frame
Delay function for inputs 9 to 16 is on, then selecting a signal for any of
inputs 9 to 16 disables [FC Adjust].
The following figure illustrates the case when FC Input 1-8 are set to up-
conversion, and FC Input 9-16 are set to cross-conversion.
To Next Page
Loading...
