Sony MVS-8000 - Auxiliary Bus Control Block (for aux Buses)

Chapter 2 Menus and Control Panel
89
Names and Functions of Parts of the Control Panel
Auxiliary Bus Control Block (for AUX Buses)
There are also models without the selected
source name displays and source name
displays shown in the following figure.
All operations except those of the [DEST]
button and [SHIFT] button are the same as
for a model with selected source name
displays and source name displays.
a AUX delegation buttons
Press one of these buttons, turning it on, to
select the bus to which to assign the cross-
point buttons in the auxiliary bus control
block.
For buses that can be selected, see “Bus
Selection” (page 147).
1 AUX delegation buttons
2 Selected source name displays
3 DEST button
qs Level selection buttons
7 KEY button
8 2ND button
qa RTR button
0 SHIFT button
6 XPT HOLD buttons
4 Selected bus display
5 Cross-point buttons
9 Source name displays
2nd
1st