Chapter 11 DME Operations
694
DME Special Effect Operations
Lighting Settings
You can specify the intensity and color of the light and the lighting pattern. The
following lighting patterns are available:
Plane: Illumination of the entire screen.
Bar: Bar illumination. You can specify the width and angle of the bar, and its
softness.
Preset: Lighting pattern suitable for nonlinear effects.
When Bar is selected, the following modes can be selected.
Normal: Emphasizes the bar highlight area.
Specular: An effect like light striking a surface with metallic reflections.
Mat: An effect like light striking paper, cloth, or another diffusively reflective
surface.
Notes
The function for setting the bar mode of the lighting area is not supported on
the MVE-8000/8000A.
Applying the Lighting effect
1
In the DME menu, select VF5 ‘Light/Trail’ and HF1 ‘Lighting.’
The Lighting menu appears.
2
Press [Lighting], turning it on.
The Lighting effect is enabled.
Knob Parameter Adjustment Setting values
5 Zoom Degree of zooming in on the
corners
1.00 to 16.00
Zoom Off
Zoom On
To Next Page
Loading...
