Chapter 18 System Setup (System)
1077
System Settings (System Config Menu)
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
The selected switcher is displayed in reverse video.
If there is only one switcher on the network, make the setting only for
SWR1 (the first switcher).
3
Press [FM Data Port Enbl], turning it on.
Setup in “Dual Simul” mode
When the system operation mode (see page 1073) is set to “Dual Simul,” the
following setting is required for setup of the two switchers and connected DME
units.
In the <Setup Target> group, set the [System 1] or [System 2] button to On,
then carry out the setup. You can also set both to On, and make the settings
simultaneously on the two systems.
To Next Page
Loading...
