Chapter 18 System Setup (System)
1079
Setting the Signal Format (Format Menu)
Software options for multi-format
To use the MVS-8000G with multi-format support requires the following
software options.
The following software options are also required depending on the number of
M/E banks.
To use the software, you are required to input an install key.
For the method of inputting an install key, see “Making Settings Required to
Use the Software” (page 1093).
1
In the System >Format menu, select the device for operations.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
System Field frequency Effective number of scan lines
HD system 50 1080i
59.94
60
23.976 1080PsF
24
25
29.97
30
50 720P
59.94
SD system 59.94 480i
50 576i
Product name Model No. Switcher
Switcher Upgrade
Software
BZS-8500M MVS-8000G
BZS-8510M MVS-8000GSF
Product name Model No. Switcher
Mix/Effect
Upgrade Software
BZS-8520M MVS-8000GSF 2M/E system or
MVS-8000G 3M/E system
BZS-8520M and BZS-8530M MVS-8000G 4M/E system
Knob Parameter Adjustment Setting values
1 Device Selection of device for operations 1 and upwards
To Next Page
Loading...
