Chapter 20 Switcher Setup (Switcher)
1226
Signal Output Settings (Output Menu)
Out 15-16: The outputs from the format converter output connectors
(FC1, FC2) are fixed, being the same signals as from Out 15 and Out
16.
Out 17-22: Assign the signals selected from the list on the right.
3
In the box on the left, press [1] or [2] to select FC Output 1 or 2.
4
In the box on the right, select the output signal.
5
Press [Set].
This assigns the signal.
Notes
It is not possible to assign the same signal to the format converter outputs
1 and 2.
To Next Page
Loading...
