Chapter 2 Menus and Control Panel
123
Basic Menu Operations
a) When the three-dimensional transformation operation mode is enabled.
b) When the [MENU] button is Off.
c) When the [MENU] button is On.
d) For the MVS-8000G in resizer control mode
a) When the [TIMELINE] button is Off.
b) When the [TIMELINE] button is On.
a) When a key other than DSK1 or DSK2 is assigned, the menu for the corresponding key appears.
Color Bkgd1 signal assigned
button
Color Bkgd >Color Bkgd1 page 438
Color Bkgd2 signal assigned
button
Color Bkgd >Color Bkgd2
CCR1 signal assigned button CCR >CCR1 >XX page 464
CCR2 signal assigned button CCR >CCR2 >XX
Device control block (trackball or joystick)
Buttons Menus See
DME1 to DME8
a)
DME >XX Chapter 11
(Volume 2)
DEV1 to DEV12 assigned
buttons
• Device >DDR/VTR >Cueup & Play
b)
• Device >DDR/VTR >Timeline
c)
Chapter 12
(Volume 2)
FM1CLIP to FM8CLIP
assigned buttons
Frame Memory >Clip >Recall page 407
K1 to K4
d)
• M/E-1, 2, 3 >Key1, 2, 3, 4 >Processed Key
• PGM/PST >DSK1, 2, 3, 4 >Processed Key
page 267
Device control block (search dial)
Buttons Menus See
DEV1 to DEV12
• Device >DDR/VTR >Cueup & Play
a)
• Device >DDR/VTR >Timeline
b)
Chapter 12
(Volume 2)
FM1CLIP to FM8CLIP
assigned buttons
Frame Memory >Clip >Recall –
Downstream key/fade-to-black control block
Buttons Menus See
DSK1, DSK2
PGM/PST >DSK1, 2 >XX
a)
page 215
Auxiliary bus control block
Buttons Menus See
To Next Page
Loading...
