Sony MVS-8000 - Page 1315

Appendix (Volume 3)
1315
Data Saved by [Setup Define] and [Initial Status Define]
Included in
Panel Setup
7323 Engineering Setup >Panel >Aux
Assign
Data relating to bus assignment to
AUX delegation buttons
7323.1 Engineering Setup >Panel >Aux
Assign >RTR Mode Setting
All data relating to RTR Mode
Setting menu
7324 Engineering Setup >Panel >Prefs/
Utility
All data relating to function
assignment to user preference
buttons
7324.1 Engineering Setup >Panel >Prefs/
Utility >Utility Module Assign
All data relating to function
assignment to utility/shotbox
control block
7324.2 Engineering Setup >Panel >Prefs/
Utility >Key 2/4 Bus Button Assign
All data relating to utility/shotbox
assignment to cross-point buttons
in the key 2 row
7325 Engineering Setup >Panel
>Device Interface
All data relating to Device
Interface menu
7325.1 Engineering Setup >Panel
>Device Interface >GPI Input
All data relating to GPI Input
menu
7325.3 Engineering Setup >Panel
>Device Interface >GPI Output
All data relating to GPI Output
menu
7325.4 Engineering Setup >Panel
>Device Interface >DCU Serial
Port Assign
All data relating to DCU Serial
Port Assign menu
7326 Engineering Setup >Panel
>Operation
All data relating to Operation
menu
7326.2 Engineering Setup >Panel
>Operation >Effect Mode
All data relating to Effect Mode
menu (excluding [Default KF
Duration] setting values)
7326.3 Engineering Setup >Panel
>Operation >Flexi Pad Mode
All data relating to Flexi Pad Mode
menu
7326.4 Engineering Setup >Panel
>Operation >Custom Button
All data relating to Custom Button
menu
7326.5 Engineering Setup >Panel
>Operation >Sensitivity
All data relating to Sensitivity
menu
7326.6 Engineering Setup >Panel
>Operation >Macro
All data relating to Macro menu
7326.7 Engineering Setup >Panel
>Operation >Custom Button
>CCP-6000/8000 Button
All data relating to CCP-6000/
8000 Button menu
7327 Engineering Setup >Panel
>Maintenance
• Setting data for the following
buttons:
- [Screen Saver]
- [LCD Brightness]
- [LED Brightness]
- [Switch Brightness]
- [Touch Beep]
• Setting data for Initial Menu
7351 to 7355 Engineering Setup >DCU All data relating to DCU
Type Menu number Menu path Saved data