Appendix (Volume 3)
1329
Error Messages
Append
Key Frame
[Append Key Frame] cannot be
executed.
FMx is not assigned to a user
region.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Append Key Frame], but it failed
because the frame memory output (FMx) is not
assigned to a user region.
7331.4: Make the assignment in the
Engineering Setup >Switcher >Config >User1-8
Config menu, and try again.
[Append Key Frame] cannot be
executed.
Key Frame Register is locked.
(UserX)
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Append Key Frame] using a locked
register (UserX region). Unlock the register.
[Append Key Frame] cannot be
executed.
Key Frame Register is busy.
(UserX)
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Append Key Frame] using a register
(UserX region) into which files are being
loaded. Try again after file loading has finished.
[Append Key Frame] cannot be
executed.
Key Frame Register is being
edited. (UserX)
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Append Key Frame] using a register
(UserX region) with which a keyframe creating
or editing operation is proceeding. Try again
after the keyframe operation has finished.
[Append Key Frame] cannot be
executed.
Key Frame Register is full.
(UserX)
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Append Key Frame] using a register
(UserX region) in which no keyframe remains.
[Append Key Frame] cannot be
executed.
Key Frame Register is not
active.(UserX)
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Append Key Frame] using a register
for which the appropriate region selection
button in the numeric keypad control block is
not selected. Try again after you select the
region selection button [UserX] in the numeric
keypad control block.
Icon Title Message Description
To Next Page
Loading...
