Sony MVS-8000 - Page 133

Chapter 2 Menus and Control Panel
133
Basic Menu Operations
a) The menu numbers shown by way of example are those for M/E-1: the same applies for M/E-2,
M/E-3, and P/P. Also, content applying to Key1 applies equally to Key2, Key3, and Key4.
1116 Transition [Wipe] in <ON Transition Type>
group
1
5
Transition
Rate
Pattern
[Wipe] in <OFF Transition Type>
group
1
5
Transition
Rate
Pattern
[Key Blink] and [Edge Blink] in
<Blink> group
1 Blink Rate
[Mix] in <Transition Type> group 1 Transition
Type
[Wipe] in <Transition Type>
group
1
5
Transition
Rate
Pattern
1116.1 Transition >
Wipe Adjust
[Multi] 3 Invert Type
[H] and [V] in <Pairing> group 1 Width
[H], [V], and [Fringe] in
<Modulation> group
4 Shape
1154 Edge/Direction [Split] in <Edge> group 1 Split No
1154.1 Edge/Direction >
Matte Adjust
[Mix Color] in <Edge Matte>
group
3 Pattern
[Multi] 3 Invert Type
1155 Main Modify [H] and [V] in <Pairing> group 1 Width
[H], [V], and [Fringe] in
<Modulation> group
4 Shape
1164 Edge/Direction [Independent Trans Rate] in
<Pattern Limit Release> group
1 Transition
Rate
1171 Transition [Mix], [Nam], [Super Mix],
[Preset Color Mix], [Wipe], [DME
Wipe], and [FTB] in <Transition
Type> group
1 Transition
Rate
Knob parameters subject to restriction on default recall
Menu number Menu name Button name Knob Parameter
1111.1
a)
Type >CRK Adjust [Sample Mark] in the <Auto> group 1
2
Position H
Position V
1112.1
a)
Edge >Matte
Adjust
[Position]
1113
a)
Main Mask [Position]
1116.1
a)
Transition >Wipe
Adjust
[Position]
Knob parameters to which default recall does not apply
Menu number
a)
Menu name Button name Knob Parameter