Appendix (Volume 3)
1348
Error Messages
Restore Prepare failed, insufficient Clip
id (–15).
2565:Frame Memory >External Device
>Restore from DDR/VTR
In the above menu, when [Restore] is pressed,
this message appears if there are not enough
Clip IDs (internal processing error).
Restore failed, Cannot find
symbol files on this tape (–18).
2565:Frame Memory >External Device
>Restore from DDR/VTR
In the above menu, when [Restore] is pressed,
this message appears if a marker frame file was
not found.
ERROR (–19). Bad register
number.
2565:Frame Memory >External Device
>Restore from DDR/VTR
In the above menu, when [Restore] is pressed,
this message appears if Register Number is
invalid (internal processing error)
Restore failed, file name
already exist, try to rename but
unsuccessful (–20).
2565:Frame Memory >External Device
>Restore from DDR/VTR
In the above menu, when [Restore] is pressed,
this message appears if renaming failed.
Cannot find the File Name
Data, please load the File
Name Data first (–21).
2565:Frame Memory >External Device
>Restore from DDR/VTR
In the above menu, when [Restore] is pressed,
this message appears if the file list was not
loaded.
Restore Files currently used for
playback cannot be restored.
Are you sure to want to restore
the FM files?
2547: Frame memory >File >Backup/Restore
In the above menu, [Restore] was pressed, but
movies (clips) currently being played back
cannot be restored.
Restore
Data
Restoring... Appears while restoring recovery data using
Menu 9999.
a)
Success!! Appears when recovery data has been
successfully restored using Menu 9999.
a)
Recovery binary on the USB
storage device is not found.
Recovery data for restoring using Menu 9999
cannot be found on the memory card. Check
that the recovery data has been correctly
copied to the memory card, and restart the
system to retry.
a)
Restore
Data
Failure.
Copying recovery data hasn’t
finished.
Restoring recovery data using Menu 9999
failed. Check that the recovery data has been
correctly copied to the memory card, and
restart the system to retry.
a)
Set Time/
Date
Error: Wrong Format. 7317: Engineering Setup >System
>Maintenance
In the above menu, an incorrect date and time
was specified. Specify the date and time
correctly.
Icon Title Message Description
To Next Page
Loading...
